BenQ Zowie ZA11 Mode D'emploi page 5

English
Specifications
• No driver needed.
• DPI (Dots per inch) settings: 400 / 800 / 1600 / 3200 dpi
• Adjustable USB report rate: 125 / 500 / 1000 Hz
• Connector: USB
• Buttons: 6 for a right-handed mouse; 8 for a mouse that fits both hands
• Cable length: 2 meters (6.6 feet)
Changing side buttons (only for mice that fit both hands)
To change between left and right side buttons, press and hold the button combinations
described below while plugging the mouse into the USB port of your computer.
• Button +
• Button +
Changing DPI setting
Press the DPI switch button (labeled
Adjusting USB report rate
To adjust USB report rate, press the button(s) described below while plugging the mouse
into the USB port of your computer.
• Button : 500 Hz
• Button : 1000 Hz
• Button +
Note: Illustrations here in this document are for reference only and may differ from the actual products available to you.
: Left-side buttons are activated. Suitable for right hand use.
: Right-side buttons are activated. Suitable for left hand use.
: 125 Hz
) to switch to a desired DPI setting.