Publicité
Les langues disponibles
Les langues disponibles
5
NOTE: If the SW-MOTECH side carrier is installed at the same time,
screws (3) and (9) are omitted. In their place, mount the screws (*) included with
the side carrier as shown in the detailed drawing below.
NOTE: Depending on the space available, screw the rack to the marked
mounting position (A) or (B) as shown in the detailed drawing above.
Mount the rack (15) on the mounting struts (7) and (8).
Then tighten the screws (16) as specified in the mounting instructions.
Once all components are in place without tension, tighten the screws (9) and
(13) according to the manufacturer's instructions.
Place the plastic plugs (19) into the mounting struts (7) and (8).
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
8
1
15
×
4
16
×
10 Nm
4
17
×
4
18
×
2
19
×
2
20
×
2
21
×
Errors and omissions excepted
Subject to technical and design changes.
Publicité
