Publicité
Les langues disponibles
Les langues disponibles
5.2 Automatic cool down
This function turns on automatically when the
temperature of the hood exceeds 70°C. The
hood continues to operate on the highest
speed to cool down. The indicator with the
symbol
on the panel turns on.
For safety reason, if the temperature
grows higher while the function is active,
the hood turns off and symbol
blink. The hood can be turned on again
when the indicator stops to blink.
5.3 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
indicator
and
seconds if the grease filter must be cleaned.
The indicator
and
every second for 30 seconds if the charcoal
filter must be replaced or cleaned. Reset can
be performed during or out of the notification
period.
This function activates after 40 hours of
the operation of the hood when the
grease filter requires cleaning and after
160 hours when the charcoal filter
requires cleaning or replacement.
Refer to cleaning the grease filter in care
and cleaning chapter.
Refer to cleaning the charcoal filter or
replacing the charcoal filter in care and
cleaning chapter.
start to
blinks regularly for 30
blinks twice per
To reset the function counter during the
notification period:
For grease filter touch
For charcoal filter touch
The indicator stops to blink for correct reset.
To reset the function counter for grease filter
out of the notification period:
For grease filter touch
For charcoal filter touch
The indicator
To activate or deactivate the counter for
charcoal filter:
Press
for 3 seconds.
The function is activated if indicator
once. The function is deactivated if indicator
blinks twice.
5.4 Deactivating and activating
panel sounds
To deactivate or activate sounds on panel
touch and hold . The indicator blinks once if
sounds are enabled and twice if sounds are
disabled.
The sound on the hood turn off cannot be
disabled.
58
for 3 seconds.
for 3 seconds.
for 3 seconds.
and
.
blinks once for correct reset.
blinks
Publicité
