URBANGLIDE BIKE 140 Mode D'emploi page 5

1. On/Off
2. Bell
There is a manual bell on the handle bar, use it for
warn people around you of your arrival.
3. Battery indicator
4. Charging
The charging port is located in the frame of
the bike as shown in the following picture.
When the battery is fully charged, the four
bars turn blue.
5. Folding and unfolding
WARNING: This product is not authorised for use on public roads, please inform yourself about the
USING INSTRUCTION
As shown in the picture, your device can be switched
on and off by using the button in red. Push up to turn
on. Then down to turn off. To turn on the front light,
press the button below the battery indicator for 3
seconds.
The screen on the right handlebars allows you to
track the battery power level of your device.
4 bars: Battery up to 100%
3 bars: Battery below 80%
2 bars: Battery below 50%
1 bar: Battery below 20%
To unfold the handlebars of your electric bicycle, lift them
up and secure them with the lock at the base. Before
riding, check that your handlebars are tight and stable.
To fold your handlebars, loosen the lock at the base of the
handlebar and then lower the handlebar along your
product. You can also unscrew the footrest and remove
the saddle so that your product takes up as little space as
possible.
legislation in your country.
5