Télécharger Imprimer la page

Samsung DV42H5000 Serie Mode D'emploi page 24

Masquer les pouces Voir aussi pour DV42H5000 Serie:

Publicité

Les langues disponibles

Les langues disponibles

CYCLE
REFRESH
WRINKLE AWAY
2. Cycle options
Anti Static
(Steam Model
Only)
Rack Dry
Mixed Load Bell
Wrinkle Prevent
My Cycle
Adjust Time
Small Load Care™
DV425000_DC68-03381A.indd 24
RECOMMENDED ITEMS
Shirts, Trouser, Comforter,
Pillows
Shirts, Trouser, Blouses
To reduce statics by clothing friction and spray steam at the later period of drying
cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS, DELICATES (Dry level of
every course exceeds Normal) and TIME DRY course.
In order to reduce statics, the drum can be paused during operation.
Rack Dry is available in the TIME DRY cycle. Temperature will be set to Extra Low only.
(Refer to the "Rack dry (DV42H5400* Only)" section on page 28.)
The mixed load bell that notifies you when the average dry level in a load is damp
dry (80 % dried). This lets you take garments that you don't want fully dried or that
dry quickly out of the dryer early while letting others continue to dry.
You can select this function in all Sensor Dry cycles except WOOL, SANITIZE. The dry
level selections are limited to Normal Dry, More Dry, and Very Dry.
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in
unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent
button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Choose your favorite cycle including cycle, temp, dry level option, etc. (Refer to the
"My Cycle" section on page 30.)
Time can be added or subtracted from the automatically set times in the Manual Dry
cycles (TIME DRY, QUICK DRY, or AIR FLUFF cycles) and WRINKLE AWAY cycle.
To add or subtract time from the cycle, press the Adjust Time arrow pad up or down
until the desired time is displayed.
To control operation rate for drying a small loads at Sensor Dry course.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS and DELICATES course.
It can't be selected/cancelled when the drying course is running.
In order to improve drying effect and control operation rate, the drum can be paused
during operation.
English - 24
DETAILS
This cycle is best for smoothing out wrinkles and
reducing odors from loads consisting of one to four dry
items. In this cycle a small amount of water is sprayed
into the dryer drum after several minutes of tumbling
with heat.
The WRINKLE AWAY cycle removes wrinkles from
clothes stored in closets, etc. It provides wrinkle release
via optimized steam care.
You can change the drying time.
(Minimum time : 20 minutes)
*For best results, load no more than 3 items.
2013-12-19
1:07:14

Publicité

loading