Télécharger Imprimer la page

Endless Summer GLT1355SP Manuel Du Propriétaire page 5

Publicité

Need help? 1.888.398.8643
Do not return to place of purchase.
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.888.398.8643 toll-free . Please have
your owner's manual and model number available for
reference .
Note: The model number is printed on a label which can be found on
the base assembly .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual) .
• (1) 16 .4 oz LP gas tank (not included) .
Typical assembly is approximately 5 minutes .
3
Place Fire Glass
W CAUTION: Do NOT dump fire glass out of package. Carefully
place fire glass by hand so dust does not clog burner.
W CAUTION: Use only Mr.Bar-B-Q Products LLC. factory-
authorized fire glass. The use of any fire glass that is not
factory-authorized can be dangerous and will void your
warranty.
W CAUTION: Do NOT cover igniter cover.
W WARNING: To ensure proper function, the igniter cover on this
burner shall be free of fire glass at all times.
Note: Fire glass should be 0 .8-1 .6 in . (2-4 cm) long . Approx . 2 .86 lb (1 .3 kg) of fire
glass are needed .
Replacement Parts
Installing LP Gas Tank
This fireplace is designed to operate
with a 1 lb . / 16 .4 oz . propane gas tank
(DOT 39 Cylinder) (Figure 1) .
DO NOT ATTEMPT TO REFILL ANY 1
lb. (16.4 oz.) PROPANE GAS TANKS!
2
Connect LP Gas Tank
Only cylinders marked "propane" may be used
W CAUTION:
Some 1-lb cylinders may form frost when near empty
W Note:
1 .
Before connecting, be sure there is no debris caught in the head of the LP
gas tank, head of the regulator valve or in the head of the burner or burner
ports .
2 .
Make sure the control knob is in the " OFF" position (Figure 7) .
3 .
Lubricate the threads of the regulator with petroleum jelly . Line up threads on
LP gas tank with regulator .
4 .
Insert LP gas tank (Figure 2) .
5 .
Rotate LP gas tank clockwise until they fit snugly together . HAND TIGHTEN
ONLY . Be careful not to crossthread when screwing in tank (Figure 3) .
6 .
Perform leak test per "Checking for Leaks" section .
1.888.398.8643
Figure 1
1 lb
453 g
3.875 in. / 9,8 cm
Figure 2
Figure 3
5
5
.
.

Publicité

loading