Télécharger Imprimer la page

Audiovox VME 9125 NAV Mode D'emploi/Certificat De Garantie page 53

Récepteur multimédia mobile

Publicité

Les langues disponibles

Les langues disponibles

OTHER MODES
External Devices
External peripheral devices, including a game console, camcorder, Zune, etc. can be connected to
this unit via RCA output using an A/V Media Adapter Cable (not included).
Right Audio
Left Audio
Ground
V ideo
3.5mm A/V Cable (not included)
Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V
INPUT connector on the front of the radio. Select "AV-IN" mode to access auxiliary devices. You
cannot directly control external devices connected to the A/V INPUT.
System Reset
To correct a system halt or other illegal operation, use the tip of a
pen to press the reset button. After a system reset, the unit restores
all factory default settings.
Replacing the Fuse
If there is no power, the fuse may be damaged and need to be
replaced.
1. Take out the unit from dashboard.
2. Check the electric connection.
3. Buy a fuse that matches the amperage of the damaged fuse.
4. Replace the fuse while the units power is disconnected.
Steering Wheel Control Programming
1. Touch the upper left corner to display the Main Menu.
2. Touch [ SWC ] to display the SWC menu.
3. Adjust each key with an individual function.
4. Touch [ Pair ] to program.
5. Press each individual steering wheel control button for each
corresponding function.
6. Once the final steering wheel control button is programmed, the
functions are saved and the programming will end.
7. Touch [ Reset ] to reset the programming.
VOL
1
2
3
4
Cover not shown
53
VOL
Reset

Publicité

loading