Publicité
Les langues disponibles
Les langues disponibles
OPERATION
ON/OFF
After it is connected to the power supply, the cooling fan will enter standby statee,
press this key and it will start up at a moderate speed, then run at a low speed;
press this key again to turn off the fan.
SPEED
Continuously press this key, the wind speed will shift as per following mode and
indicators will light on correspondingly.
Low speed-Moderate speed-High speed.
MODE
Press this key, the wind can be chosen among normal mode, natural mode and
sleep mode, and indicators will light on correspondingly. Some types of product
have their normal mode without corresponding indicators to light on.
SWING
Press this key, the wind can automatically swing left and right, and the corresponding
indicators will light on; press this key again to cancel such function.
TIMER
when the cooling fan is running, press this key for once, it will enter timing state,
and at this moment, the timing period is set at 1h, and the period can be randomly
chosen within 12h When the timing is set at 12h, press this key again to cancel
timing function. The timing period will shift as per following mode:
Note: for different machine types, the total time for timing may vary accordingly.
COOL
Press this key to start cold air function, at this moment, if frozen ice water is added
into the water box, the temperature at the outlet may reduce by about 3ºC after
a few minutes.
CONTROL PANEL
Open the battery cover back at the remote controller to load two pieces of battery (different
battery model for different remote controllers) for use. Each keystroke function for the remote
controller is same as that for the control panel. When used, the remote controller shall be
directed against the receiving window, with an effective distance of 6m. For no use, the remote
controller shall be kept properly for future use
EN
13
Publicité
