Publicité
ENGLISH
Mounted Controller Charging Dock
For use with PS5
Model number: VS5018
,
User Guide
Thank you for purchasing the Venom Charging Dock with
Headset Hook for use with PlayStation 5. Please read this user
guide thoroughly before using the product and keep the guide
safe for further reference.
Contents:
1 x Charging Dock with Headset Mount
1 x USB to USB C Charging cable
1 x Console mounting plate
Installation
1. Slide the Console Mounting Plate into the Charging Dock
with Headset Mount
2. Using the hook on the Console Mounting Plate, attach the
Charging Dock with Headset Mount onto the side of your
PS5 console
3. Connect the USB C cable to the Charging Dock with
Headset Mount and plug the USB into your console
4. The charging light indicator will momentarily flash red, blue
and then off
5. To charge, simply place your controller onto the Charging
Dock
6. Gently pull the bottom section of the Charging Dock to
reveal the Headset Hook.
Compatibility
This Charging Dock with Headset Hook is compatible with
both PS5 and PS5 Slim, it is also compatible with the Standard
DualSense and DualSense Edge controllers (V2 onwards)
Charging Light Indicators
Red = Charging
Blue = Fully charged
Blinking light = Issue with charger or input current is
too high/low
Care & Maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to protect your warranty coverage:
• Keep your device out of the reach of small children.
• Keep the device dry. Precipitation, humidity and all types
of liquid or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, allow it to dry
completely.
• Do not use or store the device in dusty, dirty areas, as moving
parts and electronic components of your device can be
damaged.
• Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
• Do not use or store the device in cold areas. When the device
returns to its normal temperature, moisture can form inside
the device and damage electronic circuit boards.
• Do not drop, knock or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the device. All of the previous
suggestions apply equally to your device, battery, charger or
any enhancements.
Publicité
