Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Operating noise
•
The refrigerator and freezer are cooled by means of a compression system. To maintain the
pre-set temperature inside the refrigerator and freezer sections, the compressor comes
into operation in response to the level of cooling required and may operate continuously if
necessary. When the compressor starts up a humming sound will be heard, tending to drop
in volume after a few minutes.
•
Another normal refrigerator operating noise is a gurgling due to the coolant flowing
through the pipes in the circuit. This noise is perfectly normal and does not mean that the
appliance is malfunctioning. If it is over-loud, there may be other causes. In this case, check
that:
-
the refrigerator is properly levelled on the floor and does not vibrate when the
compressor is in operation: adjust the feet provided as appropriate;
-
The drawers, shelves and door boxes are correctly fitted and securely in place: fit
correctly;
-
Bottles and containers on the various shelves are stable and not touching: the vibration
due to operation of the compressor may generate some noise;
Do not place kitchen units or other appliances so that they are touching the refrigerator.
Reversing the doors
Warning! Before performing any operation, unplug the unit.
Important! To do the following, we suggest you do this with someone else who is holding the
door firmly during operation.
To change the direction of the door opening, follow the procedure below:
1. Remove the cover from the top hinge.
2. Remove the top hinge by removing the screws.
3. Remove the covers from the upper and middle hinge cavities.
4. Remove the freezer door by lifting the middle hinge.
5. Remove the hinge (1) from the middle by removing the screws
(2).
6. Remove the door from the refrigerator by lifting the lower hinge.
7. Tilt the unit backwards to remove the lower hinge and both
adjustable feet.
8. Remove the stops at the bottom of the refrigerator and freezer
door, and then install them on the opposite side.
9. Replace the bottom hinge and the two adjustable feet on the
opposite side.
10. Reinstall the refrigerator door on the lower hinge by installing the hinge cavity on the
opposite side of the pin.
9
English
Publicité
