INOVU MB22 V2 Guide D'utilisation page 40

2. Take out all accessories from foams and take out the upper foam. Take out four studs
for hexagon irons from the accessory bag and lock them on the rear casing.
(Do not take the screen out from the foam to avoid damage to the screen)
Note: If the stand and base are already installed, just remove the whole by
unscrewing base then stand before.
3. Follow the instructions received with your wall mount, stand or accessory and install your
monitor on the wall or wall mount as desired. Do not pinch the screen with your hands
during the hanging process to avoid damaging the screen.
Wall Mounting Screws
4x L20mm