Eurotops 51783 Mode D'emploi page 9

R 0702 / RCC-702wood
2) Backlight:
Press the SNOOZE/LIGHT ⑥ key to activate the display backlight for 5 seconds.
1) Time and date settings
Reception of the Radio signal:
 The clock automatically starts the DCF signal search after 3 minutes of any restart or changing of new fresh batteries. The radio mast icon starts to
flash.
The clock automatically carries out the synchronization procedure with the DCF signal to correct any deviations to the exact time. If this
synchronization attempt is unsuccessful (the radio mast icon disappears from the display), the system will automatically attempt another
synchronization at the next full one hour. This procedure is repeated automatically up to total 5 times.
 To start manual DCF signal reception, press and hold ⑫ button more than 3 seconds. If no signals received within 7 minutes, then the DCF signal
search stops (the radio mast icon disappears) and start again at the next full one hour.
 During the radio control time receiving reception，to stop searching radio signal, press ⑫ button.
Time of automatic RCC signal receiving everyday(time zone:0):1:00 a.m., 2:00 a.m., 3:00 a.m.,4:00 a.m. 5:00 a.m. Automatically entering RCC
reception, with mandatory reception from 1 to 3 o'clock. If received at 3 o'clock, it will not be received on the same day. Otherwise, it will be selected to
receive from 4 to 5 o'clock. After 5 o'clock, regardless of whether the reception is successful, RCC will not be received on the same day.
F.Y.I.:
 A flashing radio mast icon indicates that the DCF signal reception has started
 A continuously displayed radio mast icon indicates that the DCF signal was received successfully
 We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or computer monitors
 Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme circumstances, place the system close to the
window.
 During the radio control time receiving mode, only the ⑫ button function, other button operation has no function, if you want to carry out other
functions of operation, please press and hold the ⑫ button more than 3 seconds to exit the RC receiving mode.
Note: When the weather station is in the same zone as Germany, the time zone is set to 00; one hour ahead of German time, the time zone is set to -01;
one hour behind German time, the time zone is set to 01; 2 hours ahead of German time, the time zone is set to 02,
If you are more than 1500km from the German signal tower, the signal received is very weak. We recommend that you set the RCC to OFF.
Manual time setting
You can set the time manually: if the signal cannot be received or if you prefer to set the time yourself, in this case to stop RCC reception press the ⑫
button.
- Press the ⑧ button for approximately 3 seconds. . The time format flashes.
- Press the ⑩ or ⑪ button to select 12 or 24h display.
- Press the ⑧ button once to confirm the entry. The time zone field flashes.
- Press the ⑩ or ⑪ button to set the time zone.
- Press the ⑧ button again to confirm entry. The time flashes.
- Press the ⑩ or ⑪ button to set the time.
- Press the ⑧ button again to confirm entry. The minutes flash.
- Press the ⑩ or ⑪ button to set the minutes.
- Press the ⑧ button again to confirm entry. The year flashes.
- Press the ⑩ or ⑪ button to set the year.
- Press the ⑧ button again to confirm entry. The month flashes.
- Press the ⑩ or ⑪ button to set the month.
- Press the ⑧ button again to confirm entry. The date flashes.
- Press the ⑩ or ⑪ button to set the date.
- Press the ⑨ button again to confirm entry. The language flashes.
- Press the ⑪ or ⑫ button to select the GER-ENG-ITA-FRE-DUT-SPA-DAN language.
After 30 seconds without input, the weather station exits the settings and switches to normal display mode.
2) Alarm setting
- Press the ⑨ button for 3 seconds to enter the alarm settings.
- Press the ⑩ or ⑪ button to set the alarm time.
- Press the ⑨ button again to confirm the entry. The minutes flash.
- Press the ⑩ or ⑪ button to set the minutes.
- Press the ⑨ button again to confirm the entry.