ekwb EK-Nucleus AIO CR240 Dark Manuel D'installation page 7

EK-AIO Nucleus 240
UNC 6-32 x 6 mm
(8x)
EK-AIO Nucleus 360
UNC 6-32 x 6 mm
(12x)
STEP 8: INSTALLING THE ASSEMBLY
OF FANS AND RADIATOR INTO A PC
CASE
Attach the assembly of radiator and the fan(s)
to the PC case with the UNC 6-32 x 6mm
screws.
Radiator on top (recommended).
Vertical placement of the radiator with
tubing at the bottom (recommended).
Vertical placement of the radiator with
tubing on the top. (The radiator reservoir
must be placed higher than the pump unit.)
4-pin
PWM
- 7 -
Avoid vertical placement of the radiator
with tubing on the top. (When the radiator
reservoir is lower than the pump unit).
Avoid radiator at the bottom.
STEP 9: PUMP – CONNECTING
CABLES
STEP A:
Plug the 4-pin PWM connector from the pump
to the motherboard.