Publicité
Les langues disponibles
Les langues disponibles
HANDLING THE APPLIANCE
POWER
•
Press the button of ON/OFF (10), to select power on / off the appliance.
SPEED
•
Press the button of ON/OFF (10), to power on the appliance.
•
Press the button of Speed (9), to select the fan speed.
•
3 speed for select: (1-2-3)
MODE
•
Press the button of ON/OFF (10), to power on the appliance.
Press the button of MODE (12), to select the fan mode.
•
•
3 mode for select: (NORMAL / NATURE / SLEEP).
•
The default mode is NORMAL, and the SLEEP/NATURE mode with the indicator be light up.
TIMER (1 - 12 HOURS)
•
Press the button of ON/OFF (10), to power on the appliance.
Press the button of TIMER (11) to the desired time period (1-12 Hours)
•
•
It will now remain in operation until the selected period of time runs out.
•
After the timer runs over, the device will turn off.
OSCILLATION
•
Press the button of ON/OFF (10), to power on the appliance.
•
Press the button of OSCILLATION (8), appliance will swing from Left to Right.
ANION
•
Press the button of ON/OFF (10) on the remote control (14), to power on the appliance.
•
You can activate this function by remote control.
TEMPERATURE DISPLAY
•
Temperature display, which is the automatic function to show the indoor temperature when
appliance working.
REMOTE CONTROL
•
All the function above can be setting by remote control
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from the receptacle.
The appliance, the power cord and the power plug should not be immersed in water or other
•
liquids when you are cleaning them. Clean them with a dry cloth.
If it is very dirty, the outside of the appliance can be wiped carefully with a moist cloth and then
•
dried carefully. Make sure that no moisture penetrates into the interior of the appliance.
•
Do not use any harsh cleaners, steel brushes, scouring powder or other hard objects to clean
the appliance as these can cause scratches on the surfaces.
•
Clean the appliance regularly.
•
Never use solvents, benzene or oil-based cleaners as these can damage the housing.
•
Re-tighten visible screw connections on the appliance regularly in order to ensure that the
device is functioning properly.
5
EN
Publicité
