Télécharger Imprimer la page

Zephyr PRB24C01AG Guide D'utilisation, D'entretien Et D'installation page 11

Publicité

Les langues disponibles

Les langues disponibles

REMOVING THE GLASS SHELVES:
1. Open the door completely.
2. Make sure the shelf is pushed back completely.
3.
either the le or right side of the shelf to create a 45° angle from its original
to
either side of the shelf too hard as it may come in contact with the inner wall mount.
4. Pull the shelf outward un l it is removed from the inner compartment. You may encounter some
resistance from the shelf guard rail.
REMOVING THE WOODEN SLIDE SHELF:
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself
4. The shelf has
the
post on the right side down while pulling up on the le plas c post. You may choose to do this
by hand or by using a
5. Evenly pull out the shelf from the track
Tip: To prevent damaging the door gasket, make sure to open the door fully before pulling the shelves out
of their track.
Note: The cooler may experience decreased cooling e ciency if air
loaded cabinet.
it is fully extended outward.
posts on both sides as indicated in the diagram below. While facing the unit, press
ead screwdriver.
it is completely removed from the inner compartment.
6
is restricted due to a fully
Make sure not

Publicité

loading