Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Installation Process_Charger
•
Use the enclosed fixing anchors and screws to hang the wall mount on the wall.
- Check the wall material and thickness of the finishing materials.
- The enclosed anchors and screws can be used when the wall material is non-cracking concrete, lightweight concrete,
strong natural stone, soft natural stone, brick, and hollow block.
- Never install on walls made of plasterboard or material made by compressing paper/wood dust (MDF). If you must
install, anchor screws must be fixed into the retaining wall (concrete) within the finishing materials. If there is no
retaining wall, an additional hanger must be installed before fixing the anchor screws.
- If installing on other unspecified wall materials, ensure the material can withstand a pull-out load of 70 kgf (686 N)
and a shearing load of 100 kgf (980 N) per anchor point.
a
d
b
Wall-mounted Device Fixing Screw
e
Anchor
c
13
Publicité
