Vetech VENT-M30T3 Notice D'utilisation page 8

C. ASSEMBLY
These operations must be carried out with the plug disconnected from the power outlet.
Assembly of blade and grills
Remove the 4 screw (6) from the main body
(9) (refer to the picture above)
Position the front grill (1) on the back grill (7) by hooking it at the top with
the small guard clops (3) and aligning the bottom with the two holes (2).
Close the hooks positioned around the circumference of the grill.
Assembly of the circular stand
Position the main body (10) in the centre of the base (14).
VENT-M30T3_MANUAL.indd 8
Assemble the back grill (7) to the motor
section (9) and secure screwing the four
screws (6).
Attention: the handle of grill (7) must be
facing upwards.
Insert the screws into the two holes and secure with the nut (2).
Centre the on upright pole/base and secure well with the base/upright
pole fastening screws (supplied) as indicated on figure A
Insert the blade (5) onto the motor pin (8)
and secure it with the screw (4).
D.
Plu
Til
Th
Sp
Sel
0 =
1 =
2 =
3 =
Os
Pu
E.
Cle
Us
DO
You
For
aut
app
fre
rec
and
GU
At
GU
1.
2.
3.
4.
5.
6.
7.
FR
07/11/18 15:13