Publicité
Les langues disponibles
Les langues disponibles
GUIDE FOR ASSEMBLING THE
BIKE
1
Preparation
Tools needed: Please open the carton from
the top.
Take out the bike and all parts. Find the small
tool case and open it. Take out the tools from
the tools case. You will also need a knife or
scissors to cut the fixing tapes on the bike and
parts. Take care not to scratch or markthe bike.
2
Adjustment of brake
Warning
The assembly of this product must be completed by an adult.
Some parts or parts during assembly may contain sharp edges or
functional sharp ridges that pose a risk of physical injury to
children.
Assembly steps
1. Preparation before assembly
Take out the product, cut off the tie with
scissors, and take out the handlebar, as
shown in figure 1
06
Figure 1
3
Handlebar Assembly
1. Remove the silicone lid. Loose the screw a little with 5 mm allen wrench.
2. Loose the 4 screws with allen wrench, remove the cap, and put handlebar in
between. Fix the 4 screws back, but don't tighten up entirely, then screw them up
in order refer to fig.4
07
Publicité
