Page 5
The materials used for the primary enclosure and pressure bearing surfaces are identified in the product datasheet or, if applicable, the specification drawing. 1. The requirements of “External Temperature Limits” apply. Copyright 2011 Baker Hughes Company. English–UNIK5000 Installation Instructions | 1...
Page 6
Stay within the permitted limits for the electrical system. Maintenance Clean the case with a moist, lint-free cloth and a weak detergent. Refer also to “Installation” and “Repair”. Copyright 2011 Baker Hughes Company. 2 | UNIK5000 Installation Instructions–English...
Page 7
6. Sortie : plage de courant ou de tension de signal. 7. Numéro de série ; date de fabrication. 1. Les exigences suivantes s’appliquent : « Limites de température externe ». Copyright 2011 Baker Hughes Company. Français–Instructions d’installation du capteur de pression UNIK5000 | 3...
Page 8
Modèles 50## : Si une borne de boîtier (« CASE ») est fournie, celle-ci ne doit pas être utilisée pour le raccordement électrique du boîtier à la terre. Copyright 2011 Baker Hughes Company. 4 | Instructions d’installation du capteur de pression UNIK5000–Français...
Page 12
Copyright 2011 Baker Hughes Company. This material contains one or more registered trademarks of Baker Hughes Company and its subsidiaries in one or more countries. All third- party product and company names are trademarks of their respective holders. bakerhughes.com...