Westinghouse Digital VR-6090Z Manuel De L'utilisateur page 26

MENU OPERATION
j
CHANNEL Menu
Select TV source.
1. Press the MENU button on the remote control to display
the Main menu, and use the LEFT and RIGHT buttons to
select the CHANNEL
2. Use the UP and DOWN buttons to highlight an individual
CHANNEL option, use the LEFT and RIGHT buttons to
change the setting, and press the MENU button to exit.
The CHANNEL menu includes the following options :
Air/Cable
Allows you to select antenna between Air and Cable.
Use Down button to highlight the "Auto Scan" item, then
press RIGHT button to enter into the following menu.
If you select "Air"as input signal in Antenna item, you can
press RIGHT button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
If you select "Cable"as input signal in Antenna item, allows
you to select Cable System among: AUTO, STD, IRC and HRC.
Use DOWN button to highlight the "Start to Scan", then press
RIGHT button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Favorite
Allows you to add these channels which you desired as the
favorite channels.
Use UP or DOWN button to highlight the "Favorite"item,
then press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item,
then press OK button to add or remove the highlighted
channel as favorite.
24