Télécharger Imprimer la page

Simplicity SDR506RH Manuel D'utilisation page 6

Masquer les pouces Voir aussi pour SDR506RH:

Publicité

Les langues disponibles

Les langues disponibles

Electrical
Specifications
4. All wiring must comply with local and national electri-
cal codes and be installed by a qualified electrician.
If
you have any questions regarding the following
instructions, contact a qualified electrician.
2. Check available power supply and resolve any wiring
problems BEFORE installation and operation of this
unit.
3. For your safety and protection, this unit is grounded
through the power cord plug when plugged into a
matching wall outlet. If you are not sure whether the
wall outlets in your home are properly grounded,
please consult a qualified electrician.
DO NOT USE
PLUG ADAPTERS OR EXTENSION CORDS.
4. The manufacturers nameplate is located on the rear
(back) wall of the cabinet. The nameplate contains
electrical and other technical data specific to this unit.
5. To avoid the possibility of personal injury, always dis-
connect the power supply before attempting to clean
and/or service the unit.
Unit Specifications:
Dehumidifying Capacity (Pints / Liters)
di
50 / 23.7
Electrical Requirements
115 Volts / 60 Hz
Power Input (watts)
* Dehumidifying
502
* Heating
1200
Rated Amperage
+ Dehumidifying
4.6
* Heating
11.0
Air Flow Circulation - High /Low Fan Speed (Cubic Feet per Minute)
178.5 / 145
Type of Refrigerant
R22
Water Tank Capacity (Liters / Pints)
5.3 / 11.2
Operating Noise Level (aB a)
50
Unit Dimensions Width / Height / Depth
13-3/4" x 30-1/2" x 13-3/16"
Net Weight (kg / Ibs.)
25 / 55.1
NOTE:
Specifications are subject to change without notice, for further improvements.

Publicité

loading