Publicité
Les langues disponibles
Les langues disponibles
Wi-Fi function parameters: activate (AP) or deactivate (OFF or STA) the WiFi function by pressing the
"PHOTO" or "ZOOM" button. When WiFi is enabled, the icon
the image.
Note: enabling Wi-Fi for a long time will increase the power consumption of the thermal vision monocular,
which will shorten the battery life. Please deactivate this function when you do not need to use WiFi.
Look for the IR-TRACKER V app in the Apple Store or Play Store, and install it on your smartphone. Once
installed, do not open the application immediately.
Go to your iPhone's Wi-Fi settings and choose the NUM'AXES VIS1055 network, then enter the password
12345678 to connect.
Once the connection is established, open the IR-TRACKER V application. Tap the "Connect" icon to display
the live view. The app allows you to take photos, record videos, or view photos and videos directly from your
phone.
Stadimetric rangefinder function: estimate the distance of observed objects whose height is known (wild boar
- 0.7 m; hare - 0.3 m) with sufficient precision. Adjust the height of the target using the "PHOTO" button or the "ZOOM"
button.
Hot spot tracking function: automatically track the hottest spot on the screen. You can activate this
function by selecting ON or ON using the "PHOTO" button or "ZOOM" button.
Note: When using this function ON the zoom locks to x1. To unlock the zoom, select OFF.
Automatic screen standby: 0/5/30/60 (min). You can adjust the contrast according to the
environment using the "PHOTO" button or "ZOOM" button.
Cursor settings: change the cursor type and cursor display position using the "PHOTO" button or
"ZOOM" button.
Picture-in-picture function: choose ON or OFF using the "PHOTO" button or "ZOOM" button to
display a smaller image over the screen display.
VIS1055 - Indice B – Déc 2023
Downloading, installing and operating the application
is displayed in the upper right corner of
12/16
Publicité
