Publicité
Les langues disponibles
Les langues disponibles
Solar Lantern Bug Zapper Use Instructions
Lift the battery compartment cover by using the appropriate button, then install the battery provided with the
bug zapper, making sure to respect the polarity indicated inside the compartment.
battery provided with the bug zapper, making sure to respect the polarity indicated inside the compartment.
Put the battery compartment cover and the inner grid cover back in place; select the desired function then
reposition the top where the solar panel is installed, then place the bug zapper in sunlight.
In case battery needs to be replace, replace it with one of the same type, following the instructions above.
Tips for winter season
During winter, make sure that the top solar panel is free from snow and ice in order to allow the battery to
recharge.
In case of snowing, it is recommended to set the switch to "OFF".
If the product is covered by snow for a long period of time, wait until the snow has completely melted and let
the battery charge for at least 12 hours.
Cleaning and maintenance
Before proceeding with any cleaning and/or maintenance operation, turn the bug zapper off.
Gently clean the internal metal grid with a soft brush to remove any electrocuted insects.
Clean the outside grid using a soft, slightly damp cloth.
Do not use metal objects to clean the internal grid, to prevent from damaging it.
Do not immerse the bug zapper in water and/or other liquids.
Make sure all parts are dry before turning the bug zapper back on.
Technical data
Power supply: Ni-Mh AA 300mAh 1.2V (included)
For any improvement reasons, Beper reserves the right to modify or improve the product without
any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment. The crossed out "wheeled bin" symbol on the product reminds you of your obligation,
that when you dispose of the appliance, it must be separately collected.
9
EN
Publicité
