Youin Folding Seat Mode D'emploi page 3

Electric Scooter Seat User Manual
Specifications
1. The range of height: 46 cm to 70 cm
2. 3 parts(under the saddle, on the
base and between the poles) can be
foldable
3. Free of punching for installation
4. Double shock absorption(damping
rod and saddle)
Installation steps
1. Install the base into your electric scooter by using 6 screws
and tools.
(If the lengthening screw nuts can not be tightened into, do not
worry, just keep it away, but do not throw off. Some times after riding, if there
is a shake, now you can tighten this nuts.)
2. Install the pole into the base by tools.
screws, please put their position into your memory. Do not forget to put spring
into install.)
Folding steps
Note: please tighten the screws of each part before riding. Do not exceed the safety
line.
For the first part: open the folding buckle, and then press the button;
For the second part: loosen the folding buckle;
For the third part: press the long stick under the saddle.
Package List
1 x Seat
6 x Screw
2 x Tool
1 x User Manual
(When you remove these