Publicité
08
HOW TO USE
Set up:
1. Unpack your CURRENTBODY Skin™ LED Eye Perfector
2. This device can be charged in two ways:
From the charging base:
Place the Eye Mask on the base, ensuring the mask charging
points on either side are in contact with the base.
Plug the USB charging cord into the charging base.
Plug the USB charging cord into a Universal USB Power
Adapter (not included) and then into a mains outlet.
The power indicator light will flash while charging and turn
solid when fully charged.
From the USB charging point on the mask:
Plug USB charging cord into the USB port connector on the
device.
Plug USB charging cord into a Universal USB Power Adapter
(not included).
3. Charge your device for 1.5-2 hours. The device is fully charged
when the power indicator light is solid (not flashing).
4. Place the device in the protective storage bag when not in use.
5. Ensure you unplug the device from the USB charger before
using. For your safety, this device will not work when it is
charging.
6. When the charge is low the indicator light will flash. To
recharge the device, follow the instructions above.
09
Publicité
