Homelegance 1677F-3 Instructions D'assemblage

PART LIST / LISTE DE PIECE
No Sketch
A Headboard / Tête De Lit
LSF Headboard Leg /
B(L)
Pied (Gauche)
RSF Headboard Leg /
B(R)
Pied (Droite)
Footboard / Pied De Lit
C
Side Rail / Longerons
D
E
Slat / Lattes
Support Leg /
F
Support pour transverses
MADE IN MALAYSIA / FABRIQUÉ EN MALAISIE
ASSEMBLY INSTRUCTION/
INSTRUCTIONS D'ASSEMBLAGE
1677F-1/3 Full Bed / Lit Double
1677F-1 Full Bed Headboard, Footboard & Slats + Support Leg /
ê
T te de Lit- Lit Double, Pied de Lit- Lit Double & Lattes et
Support de lattes
1677F-3 Twin / Full Side Rail / Longerons de c
Double
Thank you for purchasing this product. Please take time to read and follow the instructions below.
Check that you have all parts and hardware before assembly. Parts apparently missing are often
found in the packing materials. If you do not have all the parts listed, have your dealer contact us
and they will be sent to you immediately
Merci d'avior acheté ce produit. Veuillez lire et suivre les instructions ci-dessous. Vérifiez avant le
montage que vous avez toutes les pièces et fixations. Les pièces qui semblent manquer se trouvent
souvent dans les matériaux d'emballage. Si vous n'avez pas toutes les pièces de la liste, demandez
à votre detailant et nous les enverrons immédiatement.
It is recommended to install protective pads under all legs and support to avoid damage or
scratches when placing furniture on a wood floor or other hard surface, and to limit
indentation and prevent discoloration if placing on carpet.
meubles reposent sur la moquette.
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-
tighten if necessary.
Foundation / box spring required, sold separately.
Description Quantity
1
1
1
.
HARDWARE LIST / LISTE DE QUINCAILLERIE
No Description
Allen Key /
1
Clè Allen
1
Connection Bolt
2
3 Connection Bolt
Wood Dowel /
4
Goujon en bois
5 Screw / Vis
* ABOVE HARDWARE ARE PACKED IN 1677F-1 FOR ASSEMBLY
2
4
4
t Lit Jumeau / Lit
ô és-
Size Sketch
M4
M6 x 30mm
M6 x 50mm
M8 x 30mm
#8 x 28mm
PAGE 1 OF 2
REVISION 22 FEB 2024
Quantity
1
8
8
8
8