YABER U12 Manuel D'utilisation page 12

Operation
1. Starting Up the Projector
• Power on
1
Take off the protective cover.
3
Press the power button once
to turn on the projector.
Notice: When you connect the power cord to projector, the orange light will flash
10 seconds. Please wait patiently until the power light stop blinking.
Orange power Light on --- Standby Mode
Orange power Light off--- Working Mode
• First time setup
When you turn on the projector for the first time or the projector is reset to the Factory
Default Settings, you are prompted to make the first time setup.
After setup, the projector will go to the Homepage.
2
Connect the power cable to
an outlet.
4
Press the power button twice
to turn off the projector.
12
x 2