1. Safety Warnings
WARNING !
Read all of these instructions Before all use of this product .
Save all warnings and instructions for future reference.
1.1.
General safety instructions
1.
Use in a secure environment: there must be no risk
of explosions or corrosive products in the surrounding
environment during use.
2.
Take into account the environment of the work
area : do not expose the tool to rain. Do not use the
tool in damp, wet or where there is a risk of splashing
water. Keep the work area well lit. Do not use tools in
the presence of flammable liquids or gases.
3.
Maintain a clean and orderly work area : the work
area must be visible from the working position. Messy
areas and workbenches invite accidents
4.
Keep other people away : Do not allow people,
especially children, not involved in the work in
progress, to touch the tool or the extension, and keep
them away from the work area, BE particularly vigilant
with children and animals.
5.
Store unused tools : Unused tools must be stored in
a dry or locked place, out of the reach of children.
6.
Use the correct tool : Do not force a small tool or
accessory to do the work of a larger one. Do not use
the tool for any purpose for which it is not designed.
7.
Wear suitable clothing and protective equipment :
never wear loose clothing or jewelry, as they can be
caught by moving parts. It is recommended to wear
protective gloves. Contain long hair. Wearing non-slip
shoes is recommended for outdoor work.
8.
Use protective equipment: use safety glasses, a
normal or dust mask if work operations generate dust,
protective gloves (if there are no moving or rotating
parts).
9.
Do not lean too much : maintain good support and
remain balanced at all times.
1.2.
Special safety instructions
1.
Never point the blowgun towards yourself or other people
2.
Never use the blowgun for a use other than that for which it is intended
3.
The blow gun must always be unplugged from the air supply when not in use.
4.
Keep the blowgun out of the reach of children
5.
The introduction of compressed air through the mouth, nose, ear, eyes or any other orifice can cause serious injury.
6.
Do not clean your hands or clothes with the blower
7.
Do not drink, eat or smoke at work
8.
Do not use the blow gun on flammable, explosive or toxic substances such as combustible gas or refrigerant
9.
Install a shut-off valve on the supply pressure side of the blow gun. It must be possible to close it urgently in the event of a leak
or unexpected damage.
10.
When the blowgun is in use or stored, ensure that no force or twist is applied to the blowgun. This may result in broken fittings
and/or crushing, bursting or detachment of the nozzle.
11.
This product is not a toy. Do not play with the product
12.
When connecting, check the tightness of all connections. Add Teflon if necessary.
13.
DO NOT use in explosive atmospheres .
14.
NEVER exceed the maximum allowable pressure. Using the tool beyond the specified pressure range may cause safety
hazards, damage the tool.
SODISE 85 Route de Pont Gwin 29510 Briec FRANCE
NIU 06352-06352.10 V1.1
10. Treat tools with care : keep tools clean to optimize
work and safety. Follow instructions for lubricating and
changing
accessories.
periodically, if necessary, entrust their repair to an
approved maintenance station.
11. Stay alert : concentrate on work. Use good judgment.
Do not use the tool when tired.
12. Do not modify the machine : no modification and/or
reconversion must be carried out. Use of accessories
or attachments other than those recommended in this
instruction manual may result in personal injury.
13. Keep handles dry, clean and free of all lubricants and
grease.
14. Disconnect tools : Disconnect tools from power when
not in use, before servicing, and when replacing
accessories.
15. Check Damaged Parts : Before using the tool for any
other purpose, it should be examined carefully to
determine that it will function properly and perform its
intended function. Check for any broken parts that
could affect the operation of the tool. Any damaged
part should be properly repaired or replaced by an
authorized service center unless otherwise specified in
this instruction manual.
16. Warning : The use of any accessory or attachment
other than that recommended in this instruction
manual may present a risk of injury to persons.
17. Have the tool repaired by a qualified person : this
product meets the corresponding safety regulations.
Repairs should only be carried out by qualified persons
using original spare parts. Otherwise, this may expose
the user to significant danger.
Examine
their
condition
6