Publicité
Les langues disponibles
Les langues disponibles
Ice Size Adjustment Guide:
1. Press and hold the "Adjust" button for approximately 3 seconds. The unit will enter the Ice Size
Adjustment mode. The "HARVEST" LED (yellow) will be blinking continuously while the ice size is
being selected. Release the button when the LED blinks continuously to adjust the ice size.
2. While in the Ice Size Selection mode, press the "Clean" (-) button or the "Mode" (+) button for the
desired ice size.
Smaller ice setting:
By pressing the "Clean" (-) button, you can select the SMALL size of the ice cubes. The "ICE" LED
(GREEN) will flash as you select the smaller ice size.
Larger ice setting:
By pressing the "Mode" (+) button, you can select the large size of the ice cubes. The "BIN FULL"
LED (RED) will flash as you select the larger ice size.
After 10 seconds without any operation, the unit will return to the previous mode.
NOTE:
•
If during the ice size adjustment mode the "BIN FULL", "ICE" and "HARVEST" LEDS blink all at
once; this indicates that the unit is in the regular (middle) setting of the ice size.
•
When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode cannot
be accessed
16
Publicité
