Husky H52CH6TR7P Guide D'utilisation Et D'entretien page 6

Assembly
1
Attaching the cabinet handle
□
Position the cabinet handle (C) over the holes on the
cabinet (B).
□
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
2
Attaching the casters
CAUTION:
□ Be sure the drawers are locked and lay the cabinet (B) on its top. Use packaging material to protect the nish.
□ CASTER CONFIGURATION #1: UNIT WILL PRIMARILY BE STATIONARY
•Attach 2 swivel casters (E) to the cabinet (B), on the same side as the handle (C) and attach the other 2 swivel casters (E)
to the opposite side of the cabinet (B). Insert bolts (AA) and swivel caster (E) into the cabinet (B).
•Attach 2 xed casters (D) to the center of the cabinet (B) by inserting bolts (AA) and the xed casters (D) into the cabinet (B).
Do not over tighten the bolts.
D
Two people are recommended for assembly.
CAUTION:
E
6
B
C
BB
C
B