OPERATION - General information
The below description goes with the image on page 2.
1. "Heating" pilot light
2. Drip tray (removable)
3. Safe lid locking system
4. Power cord and plug
OPERATION - Before first use
1. Remove the packaging.
2. Clean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
3. Put the plug into the wall socket and allow the grill to heat up for 10 minutes. This will remove any
packaging odor from the appliance.
WARNING:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use; fumes released from the non-stick coating
when the baking plate is hot can cause stress to birds.
OPERATION - Preparations
1. Place the grill on a level, stable and heat-resistant surface.
2. Place the drip tray (2) at the front of the grill between the front feet.
3. Close the lid (6).
4. Put the plug (4) in the wall socket. The red light (1) will light and the appliance starts preheating the grill
plates (5). Once the grill plates have reached cooking temperature the red lamp will go out. This takes
approximately 2 minutes.
OPERATION - Grilling
1. Open the lid.
2. Lay the food that you want to grill on the lower grill plate.
3. Close the lid.
4. Grill the food until it is cooked. The cooking time required is different for each product.
5. Open the lid and remove the food from the grill plate.
6. Remove the plug from the wall socket once you have finished using the appliance. Bon appetit!
WARNING:
•
Do not use the safety clip (3) of the appliance for squeezing the product. The weight of the top cover will
provide an equal pressure
•
To be able to handle food with different thicknesses, there is play in the cover so that it can easily adjust
to the thickness of the food.
•
Do not use a fork, knife or other sharp object! You can damage the non stick coat with it. Warranty
becomes void when damaging the baking plate with sharp objects!
CLEANING AND MAINTENANCE
Clean the appliance after each use.
1. Remove the plug from the wall socket and allow the appliance to cool down completely.
2. Remove the food remaining from the under baking plate with a kitchen paper while it is still hot.
3. The upper baking plate is easier to clean when it is cooled down.
4. Clean the drip tray with a bit of soap.
5. Clean the housing and the top cover with a moistures cloth.
WARNING:
•
Make sure the plug has been removed from the wall socket before cleaning the appliance.
•
Never use corrosive or scouring cleaning products or sharp objects (e.g., a knife or a hard brush) to clean the appliance.
•
Never immerse the appliance, the power cord or the plug in water or any other liquid.
CLEANING AND MAINTENANCE - Stow away
1. Close the appliance and lock the clip at the right site.
2. Place the appliance at a flat and solid ground in vertical position with the handle up or just normal as you
use the appliance.
5. Grills plates
6. Lid
7. Handle
8. Plastic spatula
14
14
EN
EN