Télécharger Imprimer la page

Optimea OPC-B01-120 Instructions D'utilisation page 18

Masquer les pouces Voir aussi pour OPC-B01-120:

Publicité

Les langues disponibles

Les langues disponibles

3.Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize your-
self with its remote control. The following is a brief introduction to the remote
control itself. For instructions on how to operate your air conditioner, refer to
the How to Use Basic Functions section of this manual.
7-SWING : Starts and stops the horizontal louver movement. Hold down for 2
seconds to initiate vertical louver auto swing feature(some units).
8-SLEEP : Saves energy during sleeping hours.
9-SHORT CUT : Sets and activates your favorite pre-settings.
10-TIMER OFF : Sets timer to turn unit off (see How to Use Basic Functions
for instructions).
11-LED DISPLAY : Press this button to turn on and turn off the display on the
indoor unit.
12-C°/ F° : Press this button to alternate the temperature display between the
°C & °F.
Press together
simultaneously
1-TEMP
ments. Min. temperature is 17°C/62°F.
2-TEMP
ments. Max. temperature is 30°C/86°F.
3-ON/OFF : Turns the unit on or off.
4-FAN SPEED : Selects fan speeds in the following
order :
AUTO -> LOW - >HIGH
5-MODE : Scrolls through operation modes as fol-
lows:
AUTO -> COOL -> HEAT ->FAN
6-TIMER ON : Sets timer to turn unit on (see How
to Use Basic Functions for instructions).
Note : Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling
only appliance.
Note : Press together the two buttons simultaneously
for 5 seconds to lock the keyboard. Press together the
two buttons for 2 seconds to unlock the keyboard.
: Decreases temperate in 1°C/1°F incre-
: Increases temperate in 1°C/1°F incre-
ENG
4

Publicité

loading

Ce manuel est également adapté pour:

Opc-b01-140