Air Filter Removal - Danby Products ArcticAire ADR30B6G Guide D'utilisation Et D'entretien

Operating Instructions
AIR FILTER
Note: All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be
slightly different, but the operation and functions are the same.
Your dehumidifi er features a removable Air Filter. This fi lter is located at the front of the unit (behind the air intake grill)
directly above the water tank compartment. The air fi lter plays an important role in helping to reduce (minimize) dust/
dirt particles from the surrounding environment. A blocked/clogged air fi lter reduces air intake, impacting negatively on
operating effi ciency. To maintain maximum operating effi ciency, the fi lter must be checked and cleaned regularly (every 2
weeks). More frequent cleaning may be required depending upon indoor air quality.
IMPORTANT: Never operate the unit without the air fi lter in place.

AIR FILTER REMOVAL:

1. There are two options depending on your model. Option A: Grasp the fi lter handle, and pull the fi lter out. The fi lter will
slide out easily (Fig. 2). Option B: Remove the bucket and pull the fi lter downwards.
2. Clean the fi lter thoroughly using a vacuum cleaner or wash using lukewarm water and mild detergent. Dry thoroughly
before re-installing.
3. To re-install the air fi lter, slide the fi lter back inside the tracks and push inward.
4. Press the reset fi lter button.
Front:
1. Control Panel
2. Air Intake Grill
3. Air Outlet Grill
4. Air Filter (behind the grill)
5. Water Bucket
6. Handle (both sides)
Back:
1. Drain Hose Outlet
2. Castor
3. Power Cord and Plug
4. Band (used only when storing
unit)
Fig.2
8