Movair MOV10-09-BC Manuel D'installation Et D'utilisation page 68

9 Communication
E0
9 Ambient
E1
Error
Codes
9 Coil
E2
9 Condensate
Ft
between main PCB and
display PCB.
temperature
sensor failure
temperature
failures.
water
level alarm.
faults
¾ Check the wire harness of the
display PCB for damage.
¾ Check connection or replace
it. To clean or replace the
temperature sensor.
¾ Check connection or replace
sensor
it. To clean or replace the
temperature sensor.
high ¾ Empty
removal the rubber plug.
68
the drain pan by