Radio Frecuency Interference; Specifications - Agatec MR360R Manuel D'utilisation

10. Radio Frequency Interference
This system complies with the European R&TTE standard and
American FCC standard.
WARNING: This equipment complies with Part 15 of the FCC rules.
Any changes or modifications not expressly approved by the manu-
facturer could void the user's authority to operate the equipment.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there's no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Notice for Canada
This Class B digital device meets all require-ments of Canadian
Radio Standards Specification RSS-210.
Cet appareil numérique de la Class B respecte toutes les exigences
du Règlement sur le matériel brouilleur du Canada.
10

11. Specifications

Range
Accuracy
Fine
Coarse
Actual accuracy depends on beam diameter and distance to the transmitter.
Reception height
Reception angle
Vertical indicator
Environmental (receiver)
Receiver power
Receiver battery life
Remote display power
Frequency range
Type of attachment
MR 360R
MD 360R
Size
MR 360R
MD 360R
Weight
MR 360R
MD 360R
650 ft.(200 meters)
with Agatec lasers
1/4" (6 mm) typical
1/2" (12 mm) typical
9.75" (25 cm) detection window
360 degrees
+/- 5°
Waterproof; IP67
NiMh rechargeable battery;
charging time: 12 hours
Approx. 25-30 hours
(depends on use and temperature)
12-24V cigarette outlet power cord
65' (20 m)
between receiver and remote display
Clamps OR magnets
Suction cup mount
14 3/4" x 3" x 4"
(375 x 75 x 107mm)(w/o clamps)
4 1/8" x 3/4" x 7 3/4"
(105 x 20 x 197 mm)
4 lbs.
(1,8 Kg) (without clamps)
1/2 lb.
(0.250 kg)
11