Publicité
Les langues disponibles
Les langues disponibles
MS-7758 Manboard
▶
Spread Spectrum
Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng
clock generator pulses.
Important
•
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
•
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
•
jtter can ntroduce a temporary boost n clock speed whch may just cause your
overclocked processor to lock up.
▶
CPU Core Voltage/ DRAM Voltage.
These tems are used to adjust the voltage of CPU and Memory.
▶
Current CPU Core Voltage/ Current DRAM Voltage
These tems show current CPU/ DRAM voltage. Read-only.
▶
Overclockng Profiles
Press <Enter> to enter the sub-menu.
▶
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu.
▶
Set Name for Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Gve a name by typng n ths tem.
▶
Save Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclockng settngs to ROM for selected profile.
▶
Load/ Clear Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Load/ Clear the stored profile settngs from ROM.
▶
OC Profile Save to USB
Save the current overclockng settngs to USB flash dsk.
▶
OC Profile Load from USB
Load the stored settngs from USB flash dsk.
En-34
Publicité
