Publicité
Les langues disponibles
Les langues disponibles
Smart Care
The Smart Care function helps you diagnose and troubleshoot your dryer if it has a
problem. To enable this function, you must first download the Samsung Smart Dryer app
from the Play Store or the Apple Store, and then install it on a mobile device that has a
built-in camera. The Smart Care function has been optimized for Galaxy and iPhone series
devices. (It is not supported by some models.)
As the dryer operates, it runs a self-diagnosis function in the background. If it senses a
problem, it displays an information code on the display which you can scan using the
app's Smart Care function. The Smart Care function will then display detailed information
about the code.
Press and hold Anti Static (or Super Speed and Smart Control for the Delicate Dryer)
1.
on the dryer for 3 seconds to enter the Smart Care mode.
2.
Run the Samsung Smart Dryer app on your mobile device, and then tap Smart Care.
3.
Hold the mobile device so that the mobile device and the dryer's status bar face each
other. The app will recognize the information code automatically.
4.
When the information code is recognized correctly, the app provides detailed
information about the symptom and recommends further action.
NOTE
• The function name, Smart Care, may differ depending on your language.
• If the dryer display is reflecting light, the app may fail to recognize the information
code.
• If the app fails to recognize the information code a number of times consecutively,
enter the information code manually into the app screen.
• The information code history will be deleted after you use this function.
Sound
Mute or unmute the sound (button beeps, indicator beeps and chimes, etc.)
Delicate Dryer
• To mute the dryer's alarm sound or beeps, press and hold Air Dry and Super Speed for
3 seconds. To unmute, press and hold the same buttons again for 3 seconds.
Tumble Dryer
• To mute the dryer's alarm sound or beeps, press and hold Mixed Load Bell for 3
seconds. To unmute, press and hold the same button again for 3 seconds.
Drum Light (Tumble Dryer only)
The drum light turns on when the door is opened and turns off after 2 minutes. To
manually turn the drum light on or off, press and hold Wrinkle Prevent for 3 seconds.
FlexDry_DM9900M-DC68-03381F-03_EN.indd 51
English 51
2017-06-01
3:28:34
Publicité
