ARDES AR4F02S Mode D'emploi page 13

1 - Function switch
2 - Thermostat.
Technical data indicated on the appliance.
The appliance can emit both cold air and hot air depending upon the
function selected by means of the function switch. Make sure that the
function switch is in the OFF position before connecting or disconnecting
the appliance.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch (1) in the desired position and turn the temperature
switch (2) clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle (2)
slowly, in a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The appliance is equipped with a shut-off switch if it accidentally tips over.
Make sure that the appliance has cooled down completely before storing
it in the box.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Technical informations
Instructions for use
Maintenance
GB
GB
GB
13