Symmons TempControl 7 Serie Manuel D'utilisation Et D'entretien

7-102, 7-200, 7-400,
7-500, 7-700, 7-900, 7-1000
TempControl 7 Series
Operation & Maintenance Manual
Coordinating Model Numbers
High temp audio/visual alarm system
HTA-100
3" bimetal dial thermometer
T-425-( )
Volume control shut off valves
BV-( )
Solenoid valve
SV-( )
Tee fittings
TF-( )
WHA-1 Water hammer arrestor
Note: Insert proper model number in parenthesis.
Modifications
(Components Certified Separately)
Rough nickel finish
-NI
Polished chrome highlight finish
-P
Wall mounting bracket
-W
Note: Append appropriate suffix to model number.
Warranty
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Valve Model Min. Flow Rate*
0.5 gpm
7-102
(1.9 L/min)
0.5 gpm
7-200
(1.9 L/min)
0.5 gpm
7-400
(1.9 L/min)
0.5 gpm
7-500
(1.9 L/min)
0.5 gpm
7-700
(1.9 L/min)
0.5 gpm
7-900
(1.9 L/min)
0.5 gpm
7-1000
(1.9 L/min)
*Minimum flow rate when valve is installed at or near the hot water source with recirculated tempered water and continuously operating circulating pump.
All manuals and user guides at all-guides.com
Table 1: Flow Rate - gpm (L/min)
Min. Flow Rate
5 psi
(per ASSE 1017)
(34 kPa)
0.5 gpm 1 gpm
(1.9 L/min) (4 L/min)
5 gpm 7 gpm
(19 L/min) (27 L/min)
9 gpm 18 gpm
(34 L/min) (68 L/min)
13 gpm 22 gpm
(49 L/min) (83 L/min)
13 gpm 25 gpm
(49 L/min) (95 L/min)
13 gpm 30 gpm
(49 L/min) (114 L/min)
13 gpm 38 gpm
(49 L/min) (144 L/min)
7-102 7-200, 7-400
7-500, 7-700
Specification
TempControl thermostatic mixing valve made from lead
free** metal components. Models 102-700 feature
serviceable integral check stops. Models 900 & 1000
feature removable check stops with union ells (see table 1
for flow rates).
Temperature control range:
70°F - 150°F (21.1°C - 65.6°C)
Approach temperature:
5°F (2.8°C)
**According to US Senate bill S.3874, the term "lead free" is defined as
follows: "not more than a weighted average of 0.25 percent lead when
used with respect to the wetted surfaces of pipes, pipe fittings, plumbing
fittings, and fixtures"
Compliance
-ASME A112.18.1/CSA B125.1, CSA B125.3
-ASSE 1017
-NSF/ANSI 61.9, NSF/ANSI 372
Pressure Differential - psi (kPa)
10 psi 20 psi
(69 kPa) (138 kPa)
3 gpm 6 gpm
(11 L/min) (23 L/min)
12 gpm 18 gpm
(46 L/min) (68 L/min)
27 gpm 37 gpm
(102 L/min) (140 L/min)
38 gpm 50 gpm
(144 L/min) (190 L/min)
43 gpm 57 gpm
(163 L/min) (216 L/min)
55 gpm 76 gpm
(209 L/min) (288 L/min)
67 gpm 100 gpm
(254 L/min) (379 L/min)
7-900, 7-1000
25 psi 30 psi
(172 kPa) (207 kPa)
7 gpm 8 gpm
27 L/min) (30 L/min)
21 gpm 23 gpm
(80 L/min) (87 L/min)
41 gpm 44 gpm
(155 L/min) (167 L/min)
55 gpm 59 gpm
(209 L/min) (224 L/min)
62 gpm 66 gpm
(235 L/min) (250 L/min)
84 gpm 89 gpm
(318 L/min) (337 L/min)
111 gpm 120 gpm
(421 L/min) (455 L/min)
45 psi
(310 kPa)
11 gpm
(42 L/min)
27 gpm
(102 L/min)
53 gpm
(201 L/min)
70 gpm
(265 L/min)
77 gpm
(292 L/min)
104 gpm
(394 L/min)
140 gpm
(531 L/min)