Publicité
Les langues disponibles
Les langues disponibles
more than 2 minutes.
Bring knob on "0" (OFF) position before inserting the
plug in the socket.
Do not grab the product near to the air outlet, use the
handle
Keep at least at 5cm from the head
DESCRIPTION PH20
1. Airflow concentrator
3. Inlet air opening / Removable filter
5. Temperature control switch
7. Hook for hanging
OPERATING
-
Set the power switch (6) to "0" and plug the dryer into the power outlet.
-
This dryer operates with 2 speeds, set button (6) to "I" for lower speed and "II" for higher speed.
-
Set the air temperature using the temperature switch (5).
-
Caution: air concentrator (1) heats up quickly. When the dryer is running, do not touch it.
-
At the end of drying process, set the power switch (6) to "0" position.
-
Let the hairdryer cool down completely. (Approximately 10 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
Temperature control switch
This device offers the possibility to select the temperature of airflow. Set temperature control switch (5) to
"O" for setting the airflow at room temperature, "I" for moderately hot air and "II" for hot air.
Cool-shot
The hair dryer constantly delivers a flow of hot air. Pushing the "Cool-shot" button (4), the internal resistance
will be temporarily disabled and in a few seconds the device will blow air at room temperature.
Diffuser (8)
The product is provided with a diffuser, that gives softness and volume to the hair. Assemble the diffuser by
removing the airflow concentrator (1), fitting it to the air outlet until it clicks.
CLEANING
-
Unplug the device from the electrical outlet and wait for the complete cooling down of the unit
before starting cleaning operations.
Do not immerse the dryer in water, but clean with a slightly damp soft cloth. Periodically clean the air intake
inlet (3) with a dry brush in order to avoid the formation of dust, to ensure a good ventilation of the AC motor
and internal resistance. Remove the filter (3) for a better cleaning.
TECHNICAL FEATURES
•
Power supply: AC 220-240V~50-60Hz. Power: 1800-2200W
•
Concentrator, Diffuser
•
3 temperatures, 2 speeds, Cool-shot of air
2. Main body
4. Cool-shot button
6. 2 speeds power switch
8. Diffusor
11
Publicité
