Leatt MTB ENDURANCE 4.0 Mode D'emploi page 8

Cleaning
Hand
Wash
todxmU
Wipe only with a soft damp cloth in gentle soap or mild detergent in cold water,
rinse by wiping with a soft cloth damped in cold water and dry with a soft cloth.
Comfort padding can be hand washed and air dried.
Common substances applied to this product (solvent, cleaners, hair tonics,
etc.) can cause damage that may be invisible to the user and compromise the
effectiveness/safety of your Leatt ® helmet. Always refer to the material content
label on the helmet. None of the materials used in the construction of the
product are known to contain anything that might cause an allergic reaction or
be dangerous to health.
This product complies with the EU Regulation for Personal Protective
Equipment (Regulation (EU) 2016/425)
Note: To view the Declaration of Conformity to PPE Regulation (EU) 2016/425
please navigate to leatt.com and select the DOCUMENTS tab on your product's
page.
8
Do not Do not
bleach tumble dry
Drip dry Do not
in shade iron
Copyright © 2023, Leatt
Do not
dry clean
® Corporation