Publicité
Les langues disponibles
Les langues disponibles
BEFORE USING
• For new appliance, it should be charged for 3-5 times to
reach the maximum efficiency of the battery.
• If the clipper has not been used for more than two
months, please recharge the battery before using.
BASIC TROUBLE SHOOTING
SITUATION
Blade set is unable to fit into the
clipper.
Hair is lodged while cutting.
Blade shakes while cutting.
Clipper cannot be charged.
Blade stuck.
EMERGENCY TROUBLE SHOOTING
• Turn off the clipper and remove the plug from the socket when the clipper function is abnormal.
• Kindly keep the agent posted as long as the components are broken.
Take the clippers to the OPTIMUM technical assistance centre for inspection and repair if necessary.
GUARANTEE
• The clipper is guaranteed for a period of 36 months from the date of purchase, the guarantee terminates at this time even if the
clippers have not been used. It is therefore advisable to keep the proof of purchase (receipt and original packaging).
• The guarantee is applicable for normal conditions of use and not intensive, on clean materials with regular maintenance of all
parts.
• If the clippers are used more intensively, use the more powerful models from the OPTIMUM range.
• The guarantee covers all mechanical and electrical manufacturing defects.
• The replacement or repairs of parts that are subject to normal wear, such as the blades and power cable are therefore excluded.
Battery could be taken under guarantee, if and only if it's detected as a manufacturing problem, during 1 year.
• Any repairs made during the guarantee period do not result in a prolongation of the latter.
• The guarantee is not valid if the apparatus has been opened or damaged as a result of negligence, inexperience, or during transport.
• The replacements or repairs covered by the guarantee are free of charge by sending the apparatus directly, in its original packa-
ging, with proof of purchase to: see adress page 5.
• Shipping costs are at the expense of the purchaser.
8 8
INSPECTION POINT
Slot of blade and moving blade do not fit
well.
Power electricity.
Blade sharpness.
ON/OFF switch.
Plug.
Battery Life/Power supply
Power.
Motor Life.
Check if the blade set fits into the clipper.
AFTER USING
• Switch off the appliance and disconnect
the power supply.
• Allow it to cool down before storing it in
a safe place.
• Remove cut hairs and oil the blade.
• Remove the dirt by using cleansing brush.
• Drop 2-3 drops of oil on the blade teeth
Push the blade lightly to the middle
location.
Contact the supplier and ask
for maintenance.
Change the blade set.
Contact the supplier and change the switch.
Make sure the plug fit into the clipper in the
right electric polarity.
Contact the supplier and change
the power supply or battery
Recharge the appliance, or change the
battery.
Contact the supplier and change the motor.
Dismantle the blade set, and re-fit it into
the clipper.
METHOD
Publicité
