LITHIUM ELECTRIC CHAIN SAW
GENERAL SAFETY RULES
(For all battery operated tools)
WARNING
personal injury.
WORK AREA
1. keep your work area clean and well lit.
Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the pres-
3. keep bystanders, children, and visitors away while operating a power tools.
Distractions can cause you to lose control.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool.
ication. A moment of inattention while operating power tools may result in
serious personal injury.
2. Dress properly. Do not wear loose, clothing or jewelry, contain long hair.
Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure switch is in the locked or off position be-
inserting the battery pack into a tool with the switch on invites accidents
TOOL USE AND CARE
1. Use clamps or other practical way to secure and support the workplace to a
stable platform. Holding the work by hand or against your body is unstable
and may lead to loss of control.
2. Do not force tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
3 Do not use tool if switch does not turn it on or off. A tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
4. Disconnect battery pack from tool or place the switch in the locked or off
position before making any adjustments, changing accessories ,or storing
the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
ELECTRICAL SAFETY
4. A battery operated tool with intogral batteries or a separate battery pack
when used with another battery
5.
4. Remove adjusting keys or wrenches before tuming the tool on.A wrench or
a key that is left attached to a rotating part of the tool may result in personal
injury.
-
5. Do not overreach. Keep proper footing and balancd at all times. Proper foot-
ing and balance the tool in unexpected enable better control of situations.
6. Use safety equipment.
Dust mask, safety glasses, non-skid safety shoes, hard hat,or hearing pro-
tection must be used for appropriate conditions.
SCOPE OF APPLICATION
Cutting trees in orchards, pruning branches in municipal gardens, cutting bam-
protective equipment.