Jays t-Six True Wireless Mode D'emploi page 5

All manuals and user guides at all-guides.com
EN English
Getting started
Power on/off and pairing
To power on and pair with your device, simply open the lid of the
charging case. Go to Bluetooth® settings on your device and select
"JAYS t-Six" to pair with the earphones. If the pairing fails, the
earpieces will stay in pairing mode for 5 minutes until they finally
power off.
To power off, place the earpieces in the charging case and close the
lid.
Reconnecting
If the earpieces recognize a nearby previously paired Bluetooth®
device, they will pair automatically to that certain device.
Charging the earpieces
Place the earpieces in the charging case, the charging will begin
automatically. The case charging is indicated by the white LEDs on
the charging case. The earbuds charging then is indicated by each
side flashes in white. As they turn off, the earbuds are fully charged.
Charging the case
Charge the case by connecting the included cable to the bottom of
the case and any certified USB power output. A full 100% charge will
take around 1.5 hours (depending on temperature and charger).
Resetting
To reset, place the earpieces in the charging case and press the reset
button for 10 seconds until all four LEDs flash. The reset is indicated
by a three second LED hold. Close the lid and open again. The reset
is complete.
Troubleshooting
Problem pairing and connecting
• Make sure the earphones are not connected to another
device.
• Disable and enable Bluetooth® on your device.
• Move the earphones closer to the device or alter their
positions to avoid Bluetooth® interference.
• Verify no other wireless equipment interfere with your
earphones Bluetooth® signal.
• If the earpieces do not pair with each other, place the
earpieces in the charging case, close the lid and open again.
Then take them out both simultaneously.
Problem with sound transmission
Move the streaming device to another position. Your body,
distance, different materials and other wireless equipment can
interfere with the wireless signal between your device and
earphone.
FAQ and quickstart guide
Visit jaysheadphones.com for more instructions and help on
this product.