wolfpack K-622/1200 Manuel D'instructions page 19

_____________________________________________________________________
6. Cleaning and Maintenance:
7. Error Detection:
Please, check the following before contacting our service centre:
Problem
The motor does
not start
The suction
power is weaker
8. Technical Data:
Painted metal tank.
Capacity: 15 lt
Power: 1200 w
Voltage: 220-240 V AC
Frequency: 50/60Hz
Sound pressure level: ≤82dB(A)
Max. air flow rate: 25 L/s
Open the dust container.
Take the filter out.
Empty the tank.
Clean the filter by shaking out the ash.
Reassemble the vacuum cleaner.
Possible reason
- The power cord is not firmly
plugged into the socket.
- Damaged outlet.
- The appliance is not switched
on.
- Unit clogged
- The filter needs cleaning
- Dust container not in position.
19
EN
Advice
- Plug the unit firmly.
- Check the outlet.
- Switch the appliance on.
- Remove the blockage.
- Clean the dust filter.
- Attach the dust container
again to the cleaner.