PolyVection DAC32 Guide De Démarrage Rapide page 8

Product name: DAC32
IMPORTANT: PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
Warnings
• Any external power supply used with DAC 32 shall comply with relevant regulations and
standards applicable in the country of intended use.
The power supply should provide 5V DC and a minimum rated current of 1A.
Instructions for safe use
• This product should not be overclocked.
• Do not expose this product to water or moisture, and do not place it on a conductive
surface whilst in operation.
• Do not expose this product to heat from any source; it is designed for reliable operation at
normal room temperatures.
• Do not expose board to high intensity light sources (e.g. xenon flash or laser)
• Operate this product in a well- ventilated environment, and do not cover it during use.
• Place this product on a stable, flat, non- conductive surface while in use, and do not let it
contact conductive items.
• Take care while handling this product to avoid mechanical or electrical damage to the
printed circuit board and connectors (for naked board without enclosure)
• Avoid handling this product while it is powered. Only handle by the edges to minimize the
risk of electrostatic discharge damage (for naked board without enclosure)
• Any peripheral or equipment used with DAC32 should comply with relevant standards for
the country of use and be marked accordingly to ensure that safety and performance
requirements are met. Such equipment includes, but is not limited to, amplifiers, active
speakers and soundbars.
For all compliance certificates and numbers, please visit www.polyvection.com/
compliance.
EU Radio Equipment Directive (2014/53/EU) Declaration of Conformity (DoC)
We, PolyVection UG xxxxxxxxx, Declare under our sole responsibility that the product:
DAC32 to which this declaration relates is in conformity with the essential requirements