Publicité
Les langues disponibles
Les langues disponibles
Fig. 16
Spray wand quick-
connect collar
Nozzle
To disconnect a nozzle from the spray wand once the cleaning
job is complete:
1. Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
2. Engage the safety lock on the trigger handle.
3. Remove the nozzle by disconnecting it while pulling back
the brass Quick-Connect collar.
m
WARNING!
Do not make changes to the nozzle while
the trigger is engaged. Doing so could result in damage to the
pressure washer or injury to the user.
Working with Detergents
When cleaning with the pressure washer, some cleaning tasks
can be solved with water alone, but for most tasks cleaning
with detergent allows for more effective dirt removal.
m
WARNING!
Use only detergents specifically designed
for use with pressure washers, such as Sun Joe
DECK WASH (SPX-HDC1G), Sun Joe
WASH (SPX-FCS1G), or Sun Joe
(SPX-APC1G). DO NOT USE household detergents, acids,
alkaline solutions, bleaches, solvents, flammable material,
or industrial grade solutions. These could damage the
pressure washer. Many detergents may require mixing prior
to use. Prepare the cleaning solution as instructed on the
solution bottle.
1. Gently pull the foam cannon bottle out of its storage
position (Fig. 17).
HOUSE +
®
SNOW FOAM AUTO
®
HEAVY DUTY CLEANER
®
Fig. 17
2. Remove the cap. Fill the bottle or mix as recommended by
detergent instructions (Fig. 18), and replace it back on the
unit. Secure the cap back into place.
Fig. 18
3. Disconnect the spray wand from the trigger gun by
pressing it in firmly and twisting clockwise until the 2
wings of the spray wand can be removed from the slot
(Fig. 19).
Fig. 19
11
Foam
cannon
bottle
Detergent
for pressure
washer
Foam cannon bottle
Publicité
