Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
1. Unpack all parts and lay them on a flat, stable surface:
2. Remove all packing materials and shipping devices, if
applicable.
3. The scope of delivery varies depending on the country
and purchased variant:
Model of BLX2-M-0
• Blower x1
• Instruction manual x1
• Blower tube x1
4. If you find that parts are missing or show damage do
not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to
people and property.
5. Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
NOTE:
BLX2-M includes the charger and the battery pack.
BLX2-M-0 does not include the charger and the battery
pack.
WARNING:
Wear protective gloves for this assembly work
and always lay the product on a flat and stable
surface while assembling.
Follow the assembly instructions step-by-step
and use the pictures provided as a visual guide
to easily assemble the product!
Do not insert the battery pack before the power
tool is completely assembled or adjusted!
INSTALLING THE BLOWER TUBE
WARNING:
Take care of small parts that are removed during
assembly or when making adjustments. Keep
them secure to avoid loss.
Align and attach the blower tube to the air outlet mounting
base. Rotate clockwise for snapping the raised block of the
blower tube into slot (Fig.2).
WWW.SENIXTOOLS.COM
INSTALLING/REMOVING THE
BATTERY PACK
WARNING:
Using unsuitable batteries can lead to
malfunctions or damage the machine.
To install:
Align and slide the battery pack into the battery docking port
until it is locked in position (Fig.3).
To remove:
Press the unlock button of the battery pack and slide it out
(Fig.4).
OPERATION
WARNING:
Inspect the tool for complete installation. Any
missing, damaged or misplace may cause
serious injury. Wear protective equipments at all
times while operating the power tool.
SWITCHING ON/OFF
1. Check and secure all accessories.
2. Press the on/off switch to turn on the blower.
3. Release the on/off switch to turn off the blower (Fig.5).
WARNING:
Wait until it comes to a complete stop before
putting the product down!
NOTE:
The LED light will automatically turn on/off when the blower
starts/stops.
ADJUSTING BLOWING SPEED
The blowing speed can be changed by speed control
switch. Adjust to desired blower speed to meet your
requirement (Fig.5).
OPERATING HOURS
Only operate the product at reasonable hours - not early in
the morning, late at night or on weekends/public holidays
when people might be disturbed. Inform yourself about local
restrictions.
11 - EN
Publicité
