FRAM FreshBreeze CF10563 Guide Rapide

CF10563
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application: Mercury Villager | Nissan Quest
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V. FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: TOOLS: Unknown or not required. TOOLS:
LOCATION OF CABIN FILTER: In front of the windshield under the cowl vent screen on the passenger side of the vehicle.
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION. REMOVE ALL DEBRIS IN AND AROUND FILTER LOC REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION.
07-11
45 minutes or less
1. Position the windshield wiper arms perpendicular to the windshield and remove by turning the retaining clips at the base of the
45 minutes ou moins
arm counterclockwise, hold retaining clip outward, lift and remove wiper arm (both wiper arms must be removed). (Fig. 1)
45 minutos máx.
2. Locate the six screws at the base of the windshield and remove. (Fig. 2)
3. Open the hood. Locate and remove, along the forward edge of the cowl vent screen, the four plastic screws. (Fig. 3, 4)
4. Remove the four screw anchors by pushing upward on the screw anchor. (Fig. 5)
5. Lift up the cowl vent screen to locate and disconnect the windshield washer hose at the Y connector. (Fig. 6)
6. Carefully lift out and remove the cowl vent screen. (Fig. 7, 8)
7. On the passenger side of the vehicle locate the cabin filter cover and remove the four screws that secure the cover. (Fig. 9)
8. Remove the cabin filter cover. (Fig. 10)
9. Remove the dirty filter and filter frame. (Fig. 11)
10. Remove the dirty filter element from the filter frame by pulling the filter element forward and lifting. Replace clean element in
filter frame. (Fig. 12)
11. Reverse procedure to complete filter installation.
1
5
9
2 3
6 7
10 11
4
8
12