Publicité
Les langues disponibles
Les langues disponibles
English
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the panel from the available 3.5" bay.
4.
Insert the mobile rack into the bay and screw it to the housing.
5.
Finally connect the cables to the mobile rack and to the respective
connectors to your computer.
6.
Reattach the housing and connect the power cord to the AC adapter.
7.
Insert the HDD from the front side into the mobile rack.
8.
Switch on your computer.
9.
The hard disk drive will be found automatically and the device can be used
immediately.
Note:
1.
Do not remove the HDD if there is still access.
2.
Optionally you can install a fan on the bottom side of the mobile rack.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 02/2023
-4-
Publicité
